Vacuum unit
Tecno Star
Hybrid temperament for large domestic areas. Dual motors for simultaneous use and integrated management computer.
Ideal for large homes and semi-detached solutions.
Vacuum unit
Centrale aspirante
Tecno Star
Temperamento ibrido per le grandi superfici domestiche. Doppio motore per utilizzo contemporaneo e computer di gestione integrato.
L’ideale per abitazioni di ampia metratura e soluzioni bifamiliari.
Discover Tecno Star
Double beating heart
The two motors allow the Tecno Star vacuum unit to be used simultaneously by two operators for the suction of domestic dust.
From the on-board computer it is possible to set the Turbo function, which activates both motors with a single operator, to obtain particularly powerful suction.
The beauty of sharing
The vacuum unit for semi-detached solutions
The surface to be cleaned is divided into two zones, each with its own separate pipe network, equipped with a micro line that controls the individual motor.
The two pipes are connected in a manifold to the power station. Each motor will serve one operator on the individual zone.
Big houses for big families
The ideal choice for cleaning large areas
The surface to be cleaned is considered as a single area served by a single pipe network.
The entire system will be equipped with a single micro line controlling both motors.
Smart computer for maintenance
The innovative control and maintenance management system is based on a state-of-the-art electronic board with microprocessor.
The graphic display shows messages relating to the status of the machine and indications to be carried out in the event of faults.
What the vacuum unit detects
Filling the
dust container
Percentage of
filter cleaning
Depression value
present in the system
Need to carry out
scheduled maintenance
Engine suction hours and
start-up of the vacuum unit
Absorption
electricity
Automatic filter cleaning
Autocleaner
The Tecno Star vacuum unit is designed for installation of the Autocleaner system for automatic filter cleaning by means of a jet of compressed air that passes through the filter in the opposite direction to that of suction.
In this way the dust that has settled on the walls between the folds of the filter will detach and be free to fall into the dust collection bucket.
The system can also be fitted after the installation of the vacuum unit, using the electrical and pneumatic connections present: the computer is already set up to manage self-cleaning when it is fitted.
The new way of cleaning you will never change
We spend over 90% of our time indoors. A central vacuum system is the only system that can guarantee indoor air quality with regular cleaning. It eliminates micro-dust, dust mites and allergens through an external vent. No conventional vacuum cleaner, broom or robot can do this.
Design or renovate your home for life. Cleaning is a constant, doing it in the most hygienic way increases the well-being of the environment.
Areas of installation
Tecno Star can be installed in homes with the following characteristics:
- surface to be cleaned between 30 and 450 m²
- use by two operators at the same time
- pipe network made of 50/63 mm diameter hose
- 220/240 V ac power supply
- non-continuous use for aspiration of domestic dusts
- air exhaust ductable to the outside
- installation in places away from heat sources
Model | Recommended surface | Article | Inlet points | N. max operators |
Tecno Star | 450 m² | 3116.2TS | 16 | 1+1 |
ENERGY SAVING
ENGINES
HOMOLOGATIONS
Maintenance and assistance
For the scheduled maintenance of the central vacuum unit, the instructions in the technical manual provided and the instructions on the user interface display must be followed.
In particular, these periodic operations mainly concern cleaning the filter, emptying the dust collection container, replacing the bag, checking the correct operation of the electric motor and any obstruction of the air outlet.
All interventions not included in scheduled maintenance by the user must be performed by qualified workers
